American Pioneer Power

[Texas by God]

I was given a lb of it in FFG granulation. Ive not tried it yet, but I like what I have read above.

Sent from my SM-A716U using Tapatalk

[Whiterabbit]

I have used the stick and 2F and 3F. I’m in the I don’t like it camp. It went bang and too many years ago to remember accuracy, but if the humidity was over zero percent outside the barrel was flooded by shot 3. Wet, wet mess.

[Black Powder Bill]

I had great accuracy with APP.

Sent from my XT1096 using Tapatalk

[mooman76]

I tried it in my 45-70. It worked so so. Not bad but not great either. Best I did was 2" at 50 y. I don't remember trying it in my MLs though.

[Black Powder Bill]

I tried it in my 45-70. It worked so so. Not bad but not great either. Best I did was 2" at 50 y. I don't remember trying it in my MLs though.

Think I wrote above in my 45/70 for steel it smacked down rams at 100 yes.

Sent from my XT1096 using Tapatalk

[charlie b]

Will it work in a flintlock pan?

[Black Powder Bill]

Will it work in a flintlock pan?

Don't know I have a customer who uses triple 7 in a lyman gp flintlock and it works great according to him


Sent from my XT1096 using Tapatalk

[mazo kid]

I can't speak from experience, but subs don't usually work well as a priming powder, or so I have heard. IF....it does ignite, there is usually a signicant delay.

[charlie b]

Don't know I have a customer who uses triple 7 in a lyman gp flintlock and it works great according to him


Sent from my XT1096 using Tapatalk

That surprises me cause I have trouble with triple 7 in a sidelock percussion.

[cas]

I can't speak from experience, but subs don't usually work well as a priming powder, or so I have heard. IF....it does ignite, there is usually a signicant delay.

I had a T/C Scout pistol that if I used 777 it would hang fire every shot. A discernible skipped beat and slight pause in the ignition, same amount, every single shot.

[Black Powder Bill]

That surprises me cause I have trouble with triple 7 in a sidelock percussion.

I've shot probably 50 pounds of T7 in percussion rifle ls and the only time I had issues was when I didn't use a quick alcohol wipe prior to shooting.

Clean clean clean for all powder makes is the key to no misfires.

Sent from my XT1096 using Tapatalk

[mooman76]

Think I wrote above in my 45/70 for steel it smacked down rams at 100 yes.

Sent from my XT1096 using Tapatalk

Well good for you and your 57/70

[charlie b]

I've shot probably 50 pounds of T7 in percussion rifle ls and the only time I had issues was when I didn't use a quick alcohol wipe prior to shooting.

Clean clean clean for all powder makes is the key to no misfires.

Sent from my XT1096 using Tapatalk

That's the problem, I don't wipe after every shot. I want to get at least 5 and prefer 10 shots before needing the barrel swabbed.