I just bought a Marlin 444SS M/G and I am look to do so casting for it but here in Australia I can only find lee molds in .429 but I have notice tha most people use .431 or .430. I am wandering if I can use .429 molded bullets in my 444.
I just bought a Marlin 444SS M/G and I am look to do so casting for it but here in Australia I can only find lee molds in .429 but I have notice tha most people use .431 or .430. I am wandering if I can use .429 molded bullets in my 444.
I think .429 will be to small. I use .432/433 in mine. If all you can find is Lee molds, you will have to beagle them to get to the size you need.
Key
"Hatred is the cowards answer for being intimidated"
If you intend to beagle them check out this post:
http://castboolits.gunloads.com/show...eagling”
In a Marlin, 0.432" is the answer.
Dan
I started with .430" die , then went to .431" shortly thereafter . After a couple years with that I ordered custom sizing dies from Buffalo Arms of .432" and .433" . I used the .432" for a little over 2 years and sold it to a friend , now I use a .433" die exclusively for the 444 !
Parker's , 6.5mm's and my family in the Philippines
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |