Thanks in advance
Thanks in advance
The .357 Magnum......
1935
Major Douglas Wesson, using factory loads, which were a 158 gr. soft lead bullet, traveling 1515 fps, from an 8 3/4" barreled S&W, producing 812 ft. lbs of muzzle energy.
Antelope - 200 yards (2 shots)
Elk - 130 yards (1 shot)
Moose - 100 yards (1 shot)
Grizzly Bear - 135 yards (1 shot).
It kind of makes one wonder, why today, it will bounce off anything bigger than a rabbit
If you mean the Lee 6-gang handles than the answer is yes.
charlie
Once again, can we make some sort of a "Do Lee handles if..." sticky?
1. Lee 6-cavity handles fit Lee 6-cavity moulds perfectly.
2. Lee 6-cavity handles fit Lyman single and 2-cavity moulds perfectly.
3. Lee 6-cavity handles fit Lyman 4-cavity moulds by grinding and filing.
4. Lee 6-cavity handles fit RCBS 2-cavity moulds by grinding and filing.
5. Lee 6-cavity handles most likely fit other brands of moulds, but I own only those listed.
saeco,nei,noe,and of course ranchdogs.
some molds need some fitting but they fit most everything.
i haven't tried them on a single cavity though.
Thank you folks!!
Glad to hear that!
+1 on making that a sticky.
The .357 Magnum......
1935
Major Douglas Wesson, using factory loads, which were a 158 gr. soft lead bullet, traveling 1515 fps, from an 8 3/4" barreled S&W, producing 812 ft. lbs of muzzle energy.
Antelope - 200 yards (2 shots)
Elk - 130 yards (1 shot)
Moose - 100 yards (1 shot)
Grizzly Bear - 135 yards (1 shot).
It kind of makes one wonder, why today, it will bounce off anything bigger than a rabbit
Lee handles fit MP molds.
Paul G.
Once I was young, now I am old and in between went by way to fast.
The end move in politics is always to pick up a gun.
-- R. Buckminster Fuller
LEE 6-cavity handles fit IDEAL/Lyman 1-cavity molds very nicely !
Jerry
S&W .38/44 Outdoorsman Accumulator
Lee six-cavity commercial handles fit Accurate Mold moulds perfectly, as well as NOE moulds.
FWIW, I "third" the "sticky" idea.
Gear
Last edited by geargnasher; 08-27-2011 at 12:47 AM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |