what press do you have

[JesterGrin_1]

Lee classic cast single stage
Lee classic cast turret.
+1 what JesterGrin said about the turret. It's the only press you will ever need. Unless you swedge. And I bet someone is doing that with it.

Thank You Ekalb2000

In the picture I put up I even purchased the Pats Dock Mount thinking I would change out from one press to another as I also have a couple of RCBS Single Stage presses. But found that I only need the Lee Classic Cast Turret Press lol. But it is nice to remove when I need the extra room.

[462]

An RCBS JR2 and a JR3 single-stages. Just sold a Lee Challenger. Don't have a need for high-volume output. Too, I'm not very compatable with change. However, the Lee turret seems to have a few benefits.

[jsizemore]

Rockchucker to start. Forester Co-ax mounted on a board and clamped to the reloading bench or shooting bench at the range. Dies snap in and out and no shellholder. Makes ammo to hold the 10ring at 1000. Dillon 550 for the 45acp. Mec Grabber for the shotguns.

[1hole]

Lee hand press. 2 Lee "Reloader' presses. Lyman Spar-T. Rock Chucker.

If they all got burned tonight I would replace the two Reloaders and get a Lee Classic Cast single stage instead of the RC and a Lee Classic Turret instead of the Lyman turret. THAT'S the significant info here; not what we actually have but what we would replace it with after considering what we've learned since we got what we did!

[TCFAN]

I have and use
1 Pacific super C bought new about 1960
1 Lee turret 4 hole
1 Lee turret 3 hole
1 RCBS piggy back
1 RCBS rock chucker
2 Hornady Pro-jectors one sm. primer and one Lg. primer
1 Lee small C
1 Lee hand press
3 Lyman 450's

I am also press poor but I use each one..........Terry

[hammerhead357]

I currently have a Rockchucker, a Partner, a L-N-L Ap for handgun and rifle. For shotshells I have a Hornady progressive.

Now what I have had: A Dillon 1000. Dillon 1050, Hornady Projector, RCBS Greenmachine and a little portable built by T & N Manufacturing that was like the one sold by Huntington.

The Dillon 1050 was stolen a few years ago or I would still have it. Rotten S. O. B.s....Wes

[Digger]

Lee Classic Cast Turret !.....do I need another ?

[edsmith]

lee challenger breechlock, lee reloader press.

[Rick459]

1-650
2-550's
1lee turret
1rock chucker
1co-ax

[deerslayer]

1 lee classic cast
2 lee pro 1000

[Coffeecup]

An RCBS RC, about half of an RCBS A2 (garage sale find, no idea what happened to the rest of it), a Lyman T-Mag, a couple of Pacific C's, and old Bair C, a couple of Lee hand presses, seems like there is one or two more. Half interest in a Dillon 550.

Have the Lyman set up here at home, and a C out in the shop. I think the hand presses are both in my portable kit, the Dillon is at my brother's, and the rest of the C's are loaners for new loaders. I want to gradually get Lyman/Ideal 310s for some of the more-used calibers.

[WILCO]

LEE Challenger press and an old school Redding Turret press, plus a LEE hand held press.

[DLCTEX]

Lee classic cast turret, Lee 3 hole turret,Lee hand press,Lee loadmaster, Lyman turret, RCBS rockchucker, RCBS Jr., numerous Lee handloaders, 2 Mec 600 jr. 12 ga., 2 Mec 600 Jr. 20 ga., Pacific progressive 12 ga. I think that's all.

[buckndee]

Rockchucker
Lee Challenger
Lyman Spartan turret
Hornady Projector
3 Mec 600's

[220swiftfn]

Hmmm.....

Rock chucker (old one)
Lee challenger set up as a dedicated decapper
Dillon SDB
Lee pro 1000 set up as a dedicated decapper
2 MEC 600 Jr's

Dedicated decappers to keep all the primer residue out of the other presses. It works for me....


Dan

[Daddyfixit]

First press RCBS Rockchucker bought it 40 years ago. Have not used it
much lately
Dillon 550B, loads all my pistol & rifle ammo, just bought a second one last week
MEC 650 Grabber for 12 guage

[dromia]

Currently on my bench:

Forster Co-ax
Redding Ultramag
Redding T-7 Turret
RCBS Rockchucker
RCBS Ammomaster progressive
Hornady L-n-L AP progessive
Lee "C" press
Lee Hand press
Wamadet
3 x RCBS LAMs
3 X Lyman 450/4500
Vickers lube sizer
Redding "C" press
Lyman Junior Turret
Lyman 310 hand press

Yes I know I'm a sad so and so but I do use and enjoy them all, honest.

[dromia]

Oh forgot the Hornady shot shell press.

[Trey45]

Dromia, with all those presses on your bench, do you even have room to work??

[Digger]

Currently on my bench:

Forster Co-ax
Redding Ultramag
Redding T-7 Turret
RCBS Rockchucker
RCBS Ammomaster progressive
Hornady L-n-L AP progessive
Lee "C" press
Lee Hand press
Wamadet
3 x RCBS LAMs
3 X Lyman 450/4500
Vickers lube sizer
Redding "C" press
Lyman Junior Turret
Lyman 310 hand press

Yes I know I'm a sad so and so but I do use and enjoy them all, honest.

Yeah , but I want to know how big is the bench ? ...