Dies to make .224 from rimfire brass

plumber · 11-03-2009, 05:01 PM

Does anyone know of anyone else besides Corbin who makes a kit to make these start to finish? I found the kit on corbin's site $800, not including the core swage die or the lead tip die. Is there anything else out there?

MIBULLETS · 11-03-2009, 06:26 PM

Larry Blackmon and Richard Corbin (Dave Corbin's brother) both make them.

Blackmon doesn't have a website and I can't find his phone number, but I am sure someone here could provide it.

Richard Corbin has a website www.rceco.com. He only lists dies for his presses on his site but you can contact him by email about reloading press dies if that is what you want.

ETG · 11-03-2009, 08:15 PM

Here is a link to scanned copies of Blackmon's sales flier.

http://members.cox.net/etgoddard/BSS.pdf

plumber · 11-04-2009, 01:39 PM

Thanks for the links, has anyone used Blackmon's products? His prices look reasonable.

felix · 11-04-2009, 01:49 PM

Excellent person to do business with. ... felix

MIBULLETS · 11-04-2009, 05:00 PM

I know that his name gets mentioned in some of the bench rest circles, so they must be pretty good dies.

ETG · 11-04-2009, 08:36 PM

I have only made a little over 1K bullets from them - accuracy better than any factory ammo without tweeking the load - just loaded 1gn below max and tried them out.

11-03-2009, 05:01 PM	#1
plumber Perveyor of Lead Join Date: Jan 2009 Location: Johnston, RI (Libtard capitol of the East) Posts: 258	Dies to make .224 from rimfire brass Does anyone know of anyone else besides Corbin who makes a kit to make these start to finish? I found the kit on corbin's site $800, not including the core swage die or the lead tip die. Is there anything else out there? __________________ ΜΟΛΩΝ ΛΑΒΕ 1/20/13

11-04-2009, 01:39 PM	#4
plumber Perveyor of Lead Join Date: Jan 2009 Location: Johnston, RI (Libtard capitol of the East) Posts: 258	Thanks for the links, has anyone used Blackmon's products? His prices look reasonable. __________________ ΜΟΛΩΝ ΛΑΒΕ 1/20/13

11-04-2009, 01:49 PM	#5
felix Boolit Master Join Date: Mar 2005 Location: fort smith ar Posts: 7,792	Excellent person to do business with. ... felix __________________ felix

11-03-2009, 06:26 PM	#2
MIBULLETS Boolit Master Join Date: Dec 2008 Location: Michigan Posts: 166	Larry Blackmon and Richard Corbin (Dave Corbin's brother) both make them. Blackmon doesn't have a website and I can't find his phone number, but I am sure someone here could provide it. Richard Corbin has a website www.rceco.com. He only lists dies for his presses on his site but you can contact him by email about reloading press dies if that is what you want.

11-03-2009, 08:15 PM	#3
ETG Boolit Master Join Date: Mar 2009 Posts: 413	Here is a link to scanned copies of Blackmon's sales flier. http://members.cox.net/etgoddard/BSS.pdf

11-04-2009, 05:00 PM	#6
MIBULLETS Boolit Master Join Date: Dec 2008 Location: Michigan Posts: 166	I know that his name gets mentioned in some of the bench rest circles, so they must be pretty good dies.

11-04-2009, 08:36 PM	#7
ETG Boolit Master Join Date: Mar 2009 Posts: 413	I have only made a little over 1K bullets from them - accuracy better than any factory ammo without tweeking the load - just loaded 1gn below max and tried them out.