30-30 vs 300Blackout

[Lloyd Smale]

Here’s how it plays out at my house.
The .30 Carbine is almost a .300 BO, the .300 BO is almost a 30-30, the 30-30 is almost a 30-40, the 30-40 is almost a 30-06, the 30-06 is almost a .300 Winmag.
The key word is ALMOST.


Sent from my iPhone using Tapatalk

where's the like button. i can add the 308, 300h&h, Weatherby and the 300 ulta to your list

[Lloyd Smale]

.30 HAM'R -- Has better performance but is restricted on the weight/size of bullets. It does make a great longer range hog gun. I also have the CVA SS, fun gun. Going to try some 145gr PB with WSF when the temp goes down a bit. Should be about 1200 fps. I've run the same bullet 2150 from the carbine and accurate @ 100. I have bigger guns for when they are needed. For what you spend to get a martini or RB, the CVA just is a better choice.

yup i sure wish you could use the 110tssx in it. its hands down my favorite bo bullet but it just wont work in the hamr. if your looking for a cast bullet that will feed in both get the 130 rcbs spitzer gas check but i needs to be sized to 307 but that hasnt hurt accuracy in my guns

[steve urquell]

yup i sure wish you could use the 110tssx in it. its hands down my favorite bo bullet but it just wont work in the hamr. if your looking for a cast bullet that will feed in both get the 130 rcbs spitzer gas check but i needs to be sized to 307 but that hasnt hurt accuracy in my guns

Why wont the 110gr work in the 300 hamr? Wilson has 95-150gr loads listed for it.
If I was going to run it I would rechamber a 1:8 twist bbl and not limit it on bullet weight.
https://wilsoncombat.com/long-guns/a...300-ham-r.html
Attachment 315693

[Texas by God]

I would imagine that the extra length of the all copper Barnes bullet butts heads with the magazine length- the bugaboo that limits AR15 cartridge performance.


Sent from my iPhone using Tapatalk

[Lloyd Smale]

lots of is nose so if you seat it deep enough to run in a hamr ar the bullet would fall into the case