I am very new to LLA. Its possible I used too little but it smelled like a crayola factory when I was shooting so I probably used enough. I just did a batch this AM. P Coated and then sized to .3595 and another batch sized to .3595 and traditional lube from my old Lyman 45. I will use two different loadings of Unique for these; the coated bullets will get 6.3 grains that match an awesome load I have for HiTek 158 grain RNFP from ACME. Very accurate and hopefully so with my coating. The naked bullets get 4.3 grains as this will put the pressure at the hardness of these bullets. I'll make harder bullets in the future and can heat treat them also but for now I'll go forward with the above plans. Ill post targets when I get them and hopefully chrono data if its not raining.