Yesterday I got back the barrel that I sent to DougGuy for throat work. It always leaded in the throat and the bullets needed to be seated deep. Today I gave the pistol a good workout, those problems are gone. Thanks Doug.
Dave
Yesterday I got back the barrel that I sent to DougGuy for throat work. It always leaded in the throat and the bullets needed to be seated deep. Today I gave the pistol a good workout, those problems are gone. Thanks Doug.
Dave
I’ll second this. I had an aftermarket Glock 17 barrel that refused to plunk most cast bullets without seating deeper than I was comfortable with. Doug recently worked his magic on it and now that barrel happily gobbles up everything I’ve fed it. I couldn’t be more tickled.
Just to prove how good he is, years ago I sent him a cylinder and it was back in about a week.
Note in the box said 'it is fine as it is I did not do anything to it'
Amendments
The Second there to protect the First!
I have had both barrels and cylinders done by Doug. Well pleased with the results.
"If everyone is thinking the same thing it means someone is not thinking"
"A rat became the unit of currency"
Back in January, I had Doug lengthen the throats on three 9mm barrels. I was having to seat my cast boolits too deep to "plunk". Now, all three barrels will accept all my properly seated boolits. Thank you Doug.
If a 41 won't stop it, I wouldn't bet my life on a 44.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |