So I made this proto type powder magazine to address the powder spillage issuues when the press handle is inevitably pulled.
You will notice the tube is 36 inches in height and a transfer bar is utilized as a shut off for the safe removal of the magazine.
To eliminate any confusion or idiot moments I have made the on position the fully retracted slide position verses the extentened as to avoid any nasty mishaps which may result as a bump of my hand or other equipment.
This is my first measure and a revision will be made to allow for a spring to be wrapped around the slide to be kept in a loaded position at all times of loading,for now a rubber band and a dowel pin will be utilized while I perform trail runs to determine this powder magazine usefulness.