It is cold and wet outside. Being productive indoors. The lube is a mix of Lyman orange magic and a little JPW. Popping them out with my homemade kake kutter.
It is cold and wet outside. Being productive indoors. The lube is a mix of Lyman orange magic and a little JPW. Popping them out with my homemade kake kutter.
Last edited by Ohio Rusty; 01-03-2021 at 02:22 PM.
"This is America !!, where many have fought and died for our right
to celebrate our views with inflatable creatures in our yards ......."
Nice pictures, sounds like a good mix too. I pan lubed in the mid 1980s while still too cash strapped to buy my own lube sizer. My reloading was done in a tin shed where the cold winters made things challenging. I had a small tin lid that I melted Javalina in and was good enough to pan lube 9mm boolits. I had bought one of the original Lee push through dies with the cake cutter. Eventually, I was shooting as cast without sizing. I put the boolits into the last holes left by the last lube session, turn on the stove (small back packing type) and by the time I could see liquid lube surrounding the boolits, I'd pluck them and set them on wax paper. It didn't take long before I could just pluck them off the wax paper, leaving a little wax ring from the excess. It had the added benefit of warming up the shed a little.
I don't lube anymore, just ASBBPC, but still have my Lyman 450 and a lifetime supply of White Label Carnuba Red, good stuff.
Common sense Gun Safety . . .
Is taught at the Range!
It's cold and wet in MO too, I'm using Carnauba Red and JPW. Life is good!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |