I think my brand new Thermometer is off, first time I had a thermometer. I wanted to start looking at the differences with temperature changes in the pot. I set my pot at the usual number, for range scrap I use. It read 1000 F. Dnag, had to cool that down, got the 725 degree, and no fill out, snail tracks, wood grub trails. Brought it back to my normal pot temp #7, had 1000 degrees again, and casting is fine?
Boiled water and it was 220 - 222 degrees, that is the low end of the scale so inherently its not accurate.
Tell me that on my Lee 20# bottom pour, set on #7 is not 1000 degrees.
I want my $35 back !
Matt