…Csink2...We are awaiting the video link…and…a peek inside your handiwork up topside.
|
   
   
|
|
…Csink2...We are awaiting the video link…and…a peek inside your handiwork up topside.
a m e r i c a n p r a v d a
Be a Patriot . . . expose their lies!
“In a time of deceit, telling the truth is a revolutionary act.” G. Orwell
Not sure what you mean?Originally Posted by Outer Rondacker
Bare boolits with no lube is my guess.
Here you go! But don't ask for details on the build....LOTS of videos on YouTube.
Rubber band around the Lee bullet sizing catch cup. To keep it from popping off as it get more bullets in it.
10/4 I've had that happen a few times already! Thanks!
is that a homemade bullet feeder?
No it's a Lee. Mounted on a single stage press sizing bullets.
Great idea
FYI -- a copper coated mild steel rod is not a "brazing" rod, it is for oxy-fuel *welding*. For brazing, you use a lower melting point filler, often brass or bronze.
Lol I know that! I got twisted trying to explain where I found the rod. It was in the section with the brazing rods at the hardware store.
Very cool equipment. Good job.
Video is no longer available. Is there any other information
Sent from my iPhone using Tapatalk
I'll second that. I kept this thread saved for a future build and totally forgot about it.
Anyone know of another video for this type of set up?
https://www.youtube.com/watch?v=g8VB7mw1Qwc
Build looks pretty straight forward;
Bullet collater (DIYs on you-tube)
Lee Bullet Feed Kit
small Lee press
Lee sizing die kit.
You'd need a longer sizer punch
The only thing I'd like to see is how the action rod (actuates the bullet feeder) is attached to the press
Last edited by Grmps; 07-09-2017 at 06:24 PM.
I asked him about that. He said he drilled a hole in the longer punch and then stick a metal rod (drill bit in his case) through the hole and hooked it around the plate of the bullet feeder.
Sent from my iPhone using Tapatalk
Why not apply your talents to a Star setup where you can size and lube in one motion??
Because I already have a Lee single stage doing nothing and I want to size coated bullets.
Sent from my iPhone using Tapatalk
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote