Printing targets

[Goatwhiskers]

Whenever I go to a function where they pass out info sheets, if there's nothing printed on the back I recycle them to print targets on the back. Then I thought, if I have to use store bought paper, I could just print targets on both sides to save paper.....?.....uh, wait,.........I don't think that's gonna have a good ending. GW

[runfiverun]

our cast pic's section has a spot for printable targets.

[bangerjim]

If you shoot at a target and then turn it over, your boolits will come back at you!

[MtGun44]

Often cheaper to Xerox targets you make yourself at a commercial outfit compared to the
cost of home printing. I print one and copy 50 or so.

[dragon813gt]

I use the copier at work. Run of a ream and don't worry for a year or so.

[2wheelDuke]

Inkjet printer ink seems to be made from unicorn blood. Using a commercial grade copy machine is the way to go.

[1johnlb]

We had a guy staple targets to both sides of the stand. Said the next relay he would just turn it around.

My favorite guy is the one that runs down at the last minute with target and stapler and you hear the staple snap and the shooter shout. It's funny every time unless it's me.

[dale2242]

I use a CD called Click-n-Shoot for a lot of my targets. It has 1K targets on it.
Use your search engine . Type in printable targets.
I print mine on card stock......dale

[Wayne Smith]

I was over at the print shop once and found a ream of card stock that was torn open and a couple missing. I offered a small price and they took it! I use this for my targets.

[pworley1]

I tape an inch square piece of white paper to some newspaper for my casual shooting.

[Echo]

Paper plates and/or blue/black duck tape. A 2" square of DT makes a great aiming point...

[Green Monster]

Paper plates or i do some home made shoot n see targets for zeroing. I get the plates at discount/dollar stores.

[alamogunr]

When I was working(almost 10 years ago) I had to print a lot of reports, some only 1 or 2 pages. Every report had a cover sheet identifying the originator(me) and the report name. I used to save all old reports and cover sheets. Worked great unless the wind was blowing more than a gentle breeze.

I also salvaged some light card stock they were scrapping. That works on days when there is more than a gentle breeze.

[Hardcast416taylor]

Those paper throw mats that a car dealer puts in your vechicle when they work on it make a nice white target for later. They just toss them in the trash when your work is done. Ask them for them.Robert

[montana_charlie]

I use the copier at work. Run of a ream and don't worry for a year or so.

Does your boss go for that?

[dragon813gt]

Does your boss go for that?

Obviously, or I wouldn't be doing it. My job title also helps.

[markinalpine]

Try this site http://www.targetz.com/
Mark

[Goatwhiskers]

Guys, just an attempt at weak humor. What happens to the targets on the back when I shoot the target on the front? GW

[markinalpine]

Guys, just an attempt at weak humor. What happens to the targets on the back when I shoot the target on the front? GW

Well, since I was brought up that it's not nice to make fun of the feeble minded, I just let it pass. I thought maybe you planned to tape the holes in back shut to re-use that side.
Mark

[skeet1]

I use a Samsung laser printer and 110 lb. card stock for paper. this works out very well and doesn't cost an arm and a leg.

Ken