a neighbor stopped by my place a few days ago with the barrel out of his glock 40 s&w. He handed me the barrel and asked if i had seen anything like this. He had a stuck bullet in the barrel about two inches from the chamber. I asked him what kind of ammo he was using, reloads? He handed me a round of amerc factory ammo, this stuf is junk far as i am concerned. It was frangible ammo. I asked him if he wanted me to remove the bullet and he asked if i could do this. I got out the brass rod i have for just such ocasions and a brass hammer. A couple of squirts of kroil and a good whack with the hammer dislodged the bullet, it broke in half. He also had a round that he had tried to fire that popped the primer but did not burn the powder charge, i pulled the bullet and the powder and case looked like it had been wet on the inside.He said he was going to throw the rest of the ammo away and i asked for the stuff, he went to his truck and returned with about 150 rounds of this ammo-junk. Any one seen any info on loading frangible bullets.Not going to shoot this stuff, but hate to just toss it. Bill