good mold for .30 cal

[twoshotc]

I would like to make my first purchase for a mold to be used in a .30-.30 and maybe a .308. I would like a bullet that could be used for hunting deer maybe up to 200 yards. What are your suggestions?
thanks

[Larry Gibson]

Pretty hard to beat the tried and true 311041 for that. You might read; http://castboolits.gunloads.com/show...n-the-day-quot

Larry Gibson

[DLCTEX]

Lee 309-170

[CPL Lou]

This mold would work great in both:
http://noebulletmolds.com/NV/product...c97n0b30q9jh15

CPL Lou

[Lefty SRH]

The RCBS 308 200gr sil is great for the .308 Win cartridge.

[quilbilly]

That Lee 160 RHGC has short well in both my 30/30 and more recently in my new 308 but If hunting I would choose a flat nose.

[cbr]

I started with a lee 309-170-F and have never found a reason to try anything else. Dropped a doe at 80+ yards from my Winchester 94 30-30 this last fall.

[fatnhappy]

another vote for 311041

[avogunner]

For both 06 and 30-30, I too like the Lee 170-FP. I've been using the same single cavity for 20 years and haven't "needed" to change. I would like to try Lyman's 311041 though...I'm sure that's a fine boolit too.

[Shuz]

I've had very good luck in a lot of .30 cal rifles, including a couple .30-30 Marlins, with the RCBS 30-150FN. I believe it is very similar to the Lyman 311041.

[twoshotc]

thanks for your suggestions. I will give either the 311041 or lee 309-170 f a try.

[Wolfer]

Another vote for the 311041

[HARRYMPOPE]

Rcbs 180 fn

[wistlepig1]

Lee 170 fp

[waco]

Pretty hard to beat the tried and true 311041 for that. You might read; http://castboolits.gunloads.com/show...n-the-day-quot

Larry Gibson

Larry nailed it...........