anyone got a favorite for the 230 gr Truncated Cone (lee mold # 397-569 6 banger) over WST? i'm leaning towards 4.5 grains which is what my 200 gr SWC are loaded with. thanks
anyone got a favorite for the 230 gr Truncated Cone (lee mold # 397-569 6 banger) over WST? i'm leaning towards 4.5 grains which is what my 200 gr SWC are loaded with. thanks
I was using the Lee 452-228-1R not the TC, but 4.5 grains of WST was a very nice clean and accurate load that averaged 769 fps from my 5 inch.
cool. thanks. i got a custom bilt springer they will be exiting from so that should work! that 4.5 load of WST works real good for me so far.
My records show 4.8 WST with a 230 gr for a Hardball load which should be 820 fps.
So 4.5 gr should be a fine shooting load.
Paul in WNY
Think you can, or think you can't. Either way your right.
I only run 4.2gr of WST with the 200SWC, its a very accurate load. i do not know about the 230 boolits yet. Still WST is a great 45 and also 40 S&W powder.
yea, i use WST for .40 S&W too. its my go-to powder.
just popped off 4 rds in the back yard. little stiffer recoil than i want in a plinker load and the primers were a little flattened. may back off to 4.2 grs. but as is would make a great SD load.
ROF....Retired Old Fart
Lincoln freed the slaves, obama freed the terrorists
the wishbone will never replace the backbone
just ordered another 6 banger, this time in 200 gr swc. i like the 230 gr. better, but for plinking the 200 will save me some wheelweights which are getting harder to get. and my store bought 200 gr slugs work great for plinking.
WOOF.... what kind set up are you running w/3.8 gr WST? 18 lb recoil spring if a 1911?
ROF....Retired Old Fart
Lincoln freed the slaves, obama freed the terrorists
the wishbone will never replace the backbone
3.8 Grains of WST is my go to load with the H&G 68. You need a lighter spring. In one of my guns I need an 11 lb'er. My Para Ordinance doesn't need a spring change. It is also my go to powder in .40 with lead bullets.
At one with the gun.
I use 4.4 grains with a 228 TCBB. Nice and slow for competition use, around 720 FPS.
<--- In that gun. 4 1/4 barrel.
i also have one of those "progressive" recoil springs from brownells but haven't installed it yet in my custom springer. someday.
ROF....Retired Old Fart
Lincoln freed the slaves, obama freed the terrorists
the wishbone will never replace the backbone
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |