Got back to the range with the ar15.
Here are the particulars -
6.8 SPC
Brass - Silver State Armory
Bullet - 112gr bullet from Mountain Molds
Powder - 24.5gr H322
Primer = Rem 7 1/2
Range - 100 yards
The mold casts great and is exactly how I designed it. I should have put a little more thought into it. I have to resize the nose to get it to feed consistently. I also have to seat it deeper than intended. If I were to do it again, I would consider 5 or 10 grains lighter and using a truncated cone instead of a tangential ogive.
|
   
   
|
|
Reply With Quote
