I took your tip and I found a goo place for the Chore-Boy
Thank you
Rick
I took your tip and I found a goo place for the Chore-Boy
Thank you
Rick
Got mine at ACE hardware. Chore boy is 99.9% copper. The is a lot of copper plated steel pads out there. Do check with a magnet. Regards-Pitchnit
So, where does one find Chore Boy?
DD-MDA
Accuracy will not be good.how can I tell if I leaded my barrel
Chore Boy I found at amazon.com
I thought I may have leaded my barrel because the groups went to 5" from about 1/2 inch with lead cast bullets?? what I found out was the bullets are 001 bigger then the other cast bullets I was using and the bigger likes way less powder
the bore was very clean and lead free
thanks for all the info
Rick
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |