Chris, my dies came yesterday and as always they are perfect and once more have worked your magic and appreciate your workman ship and to all that hasn't tried any of lathesmith dies, do and will never go anywhere else.
Chris, my dies came yesterday and as always they are perfect and once more have worked your magic and appreciate your workman ship and to all that hasn't tried any of lathesmith dies, do and will never go anywhere else.
I would like to try your products. Can you send me your address so I can place an order to you. My email address is: jrlee45@yahoo.com
Thank you, Jack Lee
Chris-
Got the die a couple of days ago - great product and fast service. Thanks!
Chris,
The Star dies and top punch you made came today, look super, Ron
Last night got 3 dies for the star sizer made by Lathesmith. They are some fine looking pieces of work.
If you need quality dies at a good price and quick turn around, I recommend him. If I need any others made, I'll definitely be a return customer.
Mike
Chris
the dies and top punches I ordered came today. Haven't tried them yet but they look great. I love the L handle. It works so much better than the original handle.
Thanks
Carl
I like the L handle also, even though I have the bolt very tight the handle tended to twist as I use it. What I did was file a small flat on the side of the shaft that engages the tightening bolt and the handle quit turning.
Chris,
Do I need to send a boolit for a die .401 for the DDD38-40?
Thanks,
Sam
Muddy Creek Sam
|__
( o )\_
USN 100% Disabled
Dark Lord of The Soot
SBSS# 2137
LASSOOS#1957s
SASS VET #131
http://www.muddycreeksam.com
My Feedback!
http://castboolits.gunloads.com/showthread.php?t=66946
Ron, thanks for your fix, that's always good to know. I haven't had a problem with mine turning, but if I do, that sounds like an easy fix.
Sam, I don't need a slug, just let me know the die is meant for a "big lube" bullet so I can use the special lube row arrangement for these if you like.
Thanks,
lathesmith
The .315 die and punch and similar in .224 work real fine even after their trip across the big pond.
I now need a .310 die and punch, please. Urgently!!!
No problem Roger, check your PMs.
lathesmith
I need a .324 die now for my new 8mm mould. It's never ending!
Chris,
I need a sizer die, old school type for the DD38-40 Big lube at .401" also need a .452" for a MIHA Mold for 45 ACP. Please PM with Total and Address.
Thanks,
Sam
Muddy Creek Sam
|__
( o )\_
USN 100% Disabled
Dark Lord of The Soot
SBSS# 2137
LASSOOS#1957s
SASS VET #131
http://www.muddycreeksam.com
My Feedback!
http://castboolits.gunloads.com/showthread.php?t=66946
That sounds fine Sam, check your PM's.
Thanks,
lathesmith
I also need a .452" for a MIHA 200 gr [ Attention! Attention! Rerun Miha .45-200g Cramer 4 cavity mold] mold for 45 ACP. Please PM with Total and Address.
Thanks
zipdog, check your PM's, I've got you covered.
lathesmith
Hi Folks,
Received a .357 & .430 C - Clip sizing dies from Chris.
Excellent work, Fast Shipping, Great Price, and Good Communication, puts his work at the top o' the list!!
Will be getting more soon!!
Kudos,
Jeff
PM sent for 2 more dies, etc.
Matt, PM replied to, thanks.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |