On my low end I am getting about 1060-1100 fps bumped it up a bit and was getting mid 1300's with no sign of over pressure. One bullet I shot into I'd say an 11"-13" thick log went straight through and kept on truckin with almost no deformation, but this bullet did have some babbitt in the mix. I only had five 2 litre bottles filled with water to shoot at and those just vanished after one shot with the bullet getting lost in the dirt backstop.
What boolit? Mold? Rifle?
I use a GC version GB6 quite effectively.
Sent from my Pixel 5 using Tapatalk
500 round nose Lyman 457125 in Hornady short brass out of a 26" barreled Winchester/Miroku 1886 45-90 takedown using Reloader 7.
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote