I have a Lyman 457122 SC HP mold and I do like the HP, but I would like the option of using the mold to cast solid bullets as well. Do any of you have instructions/advice on making a solid pin for this type of mold? Thank you.
|
   
   
|
|
I have a Lyman 457122 SC HP mold and I do like the HP, but I would like the option of using the mold to cast solid bullets as well. Do any of you have instructions/advice on making a solid pin for this type of mold? Thank you.
Alan - on a Lyman mould with a hollow of about .115" I just drop a pellet of #2 shot into the mould before casting. Obviously, adjust the shot size to the diameter of your hollow. The pellet finds its own way to where it needs to be. I also have a blanking pin, so can use either method.Originally Posted by AlanF
It'll be handy if I never need it.
Insomniac, agnostic, dyslectic - awake all night wondering if there is a Dog.
Make a duplicate of your pin, only shortened enough to give a flat nose. You wouldn't really need the insulating wooden knob.
The easier but more costly approach would be to find one of the Lyman/ Ideal 350 grain molds. The mold number escapes me right now.
Robert
Find a drill bit the diameter of the HP pin and drill it into a cabinet knob. Cut it to length and or put a stop on the bit.
[The Montana Gianni] Front sight and squeeze
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote