Inline FabricationLee PrecisionTitan ReloadingMidSouth Shooters Supply
Load DataRepackboxRotoMetals2Reloading Everything
Snyders Jerky Wideners
Results 1 to 12 of 12

Thread: CBC Brazilian cases anyone ?

  1. #1
    Boolit Master wilecoyote's Avatar
    Join Date
    Jun 2021
    Location
    venice, italy
    Posts
    664

    CBC Brazilian cases anyone ?

    I've some boxes of CBC once fired .44magnum cases_
    never used CBC ammo or brass, I know nothin'about them_
    Is it worth handloading them, or better sending them to the recycler?
    opinions welcome_thanks
    Last edited by wilecoyote; 04-29-2024 at 04:50 AM.
    Food is overrated. A nice rifle is way more important.
    Rob

  2. #2
    Boolit Buddy
    Join Date
    Jun 2018
    Location
    Decatur county, TN
    Posts
    487
    I've used CBC. I think it was 9mm. I don't recall any issues.

  3. #3
    Boolit Master Gamsek's Avatar
    Join Date
    Jul 2015
    Location
    EU
    Posts
    511
    I mostly use CBC in .44 and .357. On pair with some of my Fiocchi brass and both are very good.

    Just for comparison, I avoid Selier Bellot brass if I can (hard, primer pockets different…) in .357 and .44…..but no problems in 9mm.

    So yes, CBC are decent quality and I had zero problems in last 20y with them.

  4. #4
    Boolit Master
    Join Date
    Nov 2017
    Location
    brisbane ,qld,australia
    Posts
    2,161
    CBC is excellent brass .......however check the priming ,as pre Bolsanaro ,the cases often had Berdan primers ,to make them difficult to reload.

  5. #5
    Boolit Master wilecoyote's Avatar
    Join Date
    Jun 2021
    Location
    venice, italy
    Posts
    664
    Quote Originally Posted by Gamsek View Post
    I mostly use CBC in .44 and .357. On pair with some of my Fiocchi brass and both are very good. Just for comparison, I avoid Selier Bellot brass if I can (hard, primer pockets different…) in .357 and .44…..but no problems in 9mm.
    So yes, CBC are decent quality and I had zero problems in last 20y with them.
    ...same lenght of wave about Fiocchi, here_ and I avoid S&B, too, counting that I don't shoot 9mm, but .357 and .44magnum only, today_ thanks!
    Food is overrated. A nice rifle is way more important.
    Rob

  6. #6
    Boolit Master challenger_i's Avatar
    Join Date
    May 2010
    Location
    Windy West Texas, between the rocks, and the trees.
    Posts
    591
    I have 200 rounds of CBC 45 Colt brass that I picked up in 2007 that is still holding up. Haven't had any issues with it. A friend has 50 rounds of 24 ga CBC that was converted to 577/450 that he has had good luck with.
    Rights, and Privileges, are not synonymous. We have the Right to Bear Arms. As soon as the Government mandates firearm registration, and permiting, then that Right becomes a Privilege, and may be taken away at our Master's discretion.

  7. #7
    Boolit Master
    Join Date
    Mar 2005
    Location
    Butler, Pennsylvania
    Posts
    839
    I have some CBC 357 and 45 Colt that I picked up at the range, probably a couple hundred. Been using it for a few years with no problems.

  8. #8
    Boolit Buddy Pereira's Avatar
    Join Date
    Dec 2013
    Location
    "central" West TN
    Posts
    435
    I've also used the CBC brass in 45 colt with no issue.

    RP


    Monte Walsh "You have No idea how little I care".

  9. #9
    Boolit Master wilecoyote's Avatar
    Join Date
    Jun 2021
    Location
    venice, italy
    Posts
    664
    Gentlemen, thank you ALL for the almost unanimous answers !
    Food is overrated. A nice rifle is way more important.
    Rob

  10. #10
    Boolit Grand Master Bazoo's Avatar
    Join Date
    Dec 2013
    Location
    Cecilia, Kentucky
    Posts
    6,874
    I appreciate everyone sharing their experiences. I've not loaded CBC exclusively in a batch, but in processing mixed brass I have loaded it. I've never had a problem with it, and thought it was consistent. I have shot some of the CBC ammo in various calibers and it's great factory ammo.
    BulletMatch: Cataloging the World's Bullets

    Lead Alloy Calculator

  11. #11
    Boolit Buddy
    Join Date
    Dec 2023
    Posts
    246
    CBC markets in the US under the name Magtech. Currently it also acquired S&B. CBC (Companhia Brasileira de Cartuchos) became the world's largest ammunition manufacturer. Which is part of the same group as Taurus... also Brazilian. And as fate would have it... they are large arms companies in a disarmament country!!

  12. #12
    Boolit Grand Master

    Wayne Smith's Avatar
    Join Date
    Mar 2005
    Location
    Hampton Roads, Virginia
    Posts
    13,673
    And I've never had a problem with S&B brass after I have run a primer pocket trimer in it.
    Wayne the Shrink

    There is no 'right' that requires me to work for you or you to work for me!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check