Re-Run: NOE 460 350Gr. RF (RD)

[TMenezes]

Hi all, first time here. I am looking for a good mold for my new 458 SOCOM.

Please put me down for an RG4 gas checked model, unless of course this boolit wont function well in my rifle.

Any help/tips/advise for a new caster/reloader would be appriciated

[midnight]

This is only a guess but it should work fine in the Socom. The nose is only 0.395 long. I use bullets much longer than that in the Beowulf and they fit the magazine and chamber easily.

Bob

[Shedhunter]

You can put me down for a RG2 plain base. Thanks

[TMenezes]

Thanks Bob, I like the look of the Beowulf as well, haven't had the opportunity to shoot one yet.

Did I make it on the list in time for my RG4 gas checked mould?

[midnight]

I need this mold drilled for the temp probe. I forgot to ask in my 1st post.

TMenezes - Swede has a production & delivery schedule. The 460 350 is scheduled for early April but he is about 3 weeks behind right now so you made it in plenty of time.

Bob

[rollmyown]

Bump for list update/interest.

[bfuller14]

Mebe007,
Could I change mine (#23) too a PB please?

Thank you Sir,
Barry

[2hawk]

Another one here, after some thinking I'd like to change mine to PB instead of GC.
#14 on the list.

[TMenezes]

Sorry I'm very new to this, when do we send in our money and how do we do so?

[midnight]

Just before Swede begins to make the molds he will send you a PM asking for payment. He will tell you how much and how to pay. You can use Paypal, USPS MO, or check I think. He will tell you in the PM. There is a small surcharge for Paypal. Swede has a production schedule. It is the first sticky in the active group buy section. He updates it periodicaly sp?. He is about 3 weeks behind the schedule right now.

Bob

[sten668]

OK, I have waited long enough, just got a new Contender barrel and need an:
RG4 with plain bases.

[two bit okie]

have not seen my name on any llist and wanting to make sure that I AM indeed on the list for 4 cav and lead post thermometer.

[bfuller14]

Mebe007,
Are you alright? Have not seen you on here since 1-24-12

Please let us know you are OK,
Barry

[30calpal]

Hope its not too late to get in. I'm new here and may not understand the terminology. RG + number = mold with that # cavities, right? And interchangeable pins to make either HP or Flat Nose ? If this is correct, I would like an RG-2 GC, penta pin preferred but round pins will do. If round pin are the only option, could I get them just a little bit smaller than the HP shown in the photo in the first post? That wall looks a little thin to me. agw@agwilsonlaw.com

[SwedeNelson]

Have sent mebe007 a e-mail to see if everything is OK.
Will update the list and keep a eye on it until we hear from our honcho.
1) mebe007: RG4 2pb 2 GC
2) square butte: RG2 PB
*3) Ed in North Texas: RG-2 GC lead pot thermometer
4) Kitika: RG4 PB
5) midnight: RG4 GC drill for probe lead pot thermometer
6)Humbo: RG2 GC
7) LEO GETS: 4cav-2pb-2gc (no hp)
8) coaldust: 4cav GC
9) PbHurler: RG4 2PB 2GC + 2Cav Solid GC
10) MDF99: RG2 GC
11) chuck4570: 5 cav 3PB 2 GC
12)Shedhunter RG2 PB
13)BLD451: RG4 PB
*14)2Hawk: RG4 PB
15)Flintlockrecord: 4 cav PB
16)Gandydancer: RG2 HP
17) Rhuoser: RG2 GC
18) wiersy111: 5cav GC
19) Olevern: RG2 GC
20) bodydoc447: 4Cav 2GC 2PB
21) Dsmjon: RG2 GC
22)supe47: 2cav GC
23) Bfuller14: RG4 PB
24) 725: 2cav Solid GC
25 dholla 2 cavity GC
26 dholla RG2 GC
*27 rollymown RG2 GC
28 jlkehoe3 2 cavity 1GC 1PB
29 slaid 4 cavity PB
30 HighHook RG4 2GC 2PB
31 jld in IA RG2 GC
32 TMenezes RG4 GC
*33 sten668 RG4 PB
34 two bit okie 4 cavity PB lead pot thermometer
35 30calpal RG2 GC
36 Bullfrog54 RG2 cavity GC
37 codeNshoot RG2 cavity GC
38 MostlyOnThePaper RG2 GC w/extra pins lead pot thermometer
39 Bryan Marino RG2 GC
40 jaydub in wi 3 cavity GC
41 nooneimportant RG4 PB
42 sffar 2 cavity 1GC 1PB drill for probe
43 DEVERS454 RG2 GC
44 FLYCUTTER RG4 GC
45
46
47

(*) Paid



Thanks
Swede Nelson

[725]

I see at the end of the post there is an indication about payment. Is it time to send in the money?

[two bit okie]

two bit okie wants 4 cavity PLAIN BASE, NOT GC

[SwedeNelson]

725
We are about 3 to 4 weeks behind.
Will get a PM for payment out in about 2 weeks.

two bit okie
Done

Thanks
Swede Nelson

[725]

Thanks Swede. I'll break into the piggy bank then.
725

[midnight]

Hey Swede, could you add a lead pot casting thermometer to my mold order? I dropped my Lyman & now it won't go below 300º & who knows how accurate it is in the casting range. At least I got 20yrs out of it.

Bob