Search:

My shoulder hurts just thinking about that.

If it was me, I'd throw them in my burn barrel. Light it up and come back in a day or two (so I know it was cold and one wasn't gonna go off on me) and clean the mess up. Might cover the top with a...

Get a new one and cut this on down for HD use.

I wouldn't wait too long, if you go to get it and he sold it to someone else you'll be kicking yourself .

One think to think about, that drum probably took a while to fill up, so the farther you go down the less steel and zinc you will find.

Nice work

Might be a good use for zinc weights, I'm sure we can come up with enough of 'em. :sad:

I'd leave the paint on, since you don't need to worry about surface quality on the lead it shouldn't hurt anything (as long as you don't breath the burning paint fumes). It should act as a half...

A friend of mime has does this with a 12gauge. He uses a modified lee slug mold and drills a hole into the nose. Stuffs in as much powder as he can (I don't no what kind but it's not black) and...

The oil evaporates and the vapors are what burns. As it gets hotter it will evaporate faster and burn better.

Well that was kind of a let down, thought i had something special. Thanks guys.

I found a handful of brass marked 9x17 at the range today, never heard of it before. Is this a rare caliber?

Thanks for the pics BB, I'll probably build one of those if I can find a tank.



Seems to me it would fill everything they filled from it with flammable vapors.

From what I've read oil smokes badly if it isn't burned hot enough, I was wondering how badly his smoked cause it seems a lot easier to build than others I've seen.

How clean does the oil burn, does it make a lot of smoke? I've always got oil around, with 7 vehicles to maintain it adds up quick.




This guy? http://www.backyardmetalcasting.com/

Hang the plates from some chain welded to the back of the plate about 1/3 of the way down from the top. This will make the plate hang with a slight angle and allow the plate to move when hit, plus...

What about making molds with a large section on top? Like the 2 inch size you want for the length you want, then upside to four or six inches in diameter for a few inches (you can expirement with...

Don't use any kind of paper product to clean/polish plastic, that's probably where you got the scratches in the first place.

I love that show. Did you see the part when he shot from the Harley, that was cool.

OK, thanks.

What does "SEE condition" mean?

You could probably use a c clamp with the foot popped off the end off the screw and a nut welded to the top.

I'm not a lawyer, but my gut says it's illegal.

The one at my range has gotten lazy, he's hung up buckets marked "brass for range repair". I talked to the owner, he's never seen a penny from the guy. I no longer have any qualms taking brass out...

If the grooves are small enough that you can get a bore measurement and a bore + one groove measurement you can subtract the one groove form the bore, then double the result and add it back it the...