If you use one with “ dogs” you can just put an off dog in it and set the timer for the amount of hours before the off dog. Then once it trips off it won’t come in again until you manually trip it...
Type: Posts; User: j4570
Forum: Reloading Equipment
If you use one with “ dogs” you can just put an off dog in it and set the timer for the amount of hours before the off dog. Then once it trips off it won’t come in again until you manually trip it...
Forum: Reloading Equipment
nseries,
That’s the other one I saw. Glad to hear it works well.
Forum: Reloading Equipment
This sounds like a good idea. I found this mechanical one on amazon. They have some fancier push button ones too:
https://a.co/d/0Bp4tLY
Forum: Case Forming / Re-forming
284 is it. But with 7.5 Prvi available it isn’t worth it.
Forum: Reloading Equipment
Interestingly,
1.185 is right at 30mm.
I don’t know what you would machine it out of.
O1 precision ground is available to start with. You could have 3 made hopefully.
...
Forum: Reloading Equipment
Here a discussion from the past:
https://castboolits.gunloads.com/showthread.php?290225-Rock-Chucker-ram-dimensions
I also measured my Rockchucker IV and it is 0.998” with calipers and about...
Forum: Reloading Equipment
Froggie,
What’s the diameter of that ram?
Forum: Reloading Equipment
RCBS make an adapter too
https://www.rcbs.com/dies-and-shell-holders/single-stage/shell-holder-herters-adapter/16-99200.html
Forum: Reloading Equipment
Here’s the RCBS ram
https://www.rcbs.com/dies-and-shell-holders/single-stage/shell-holder-ram-c-adapter/16-9109.html
Everyone shows out of stock but Grafs
...
Forum: Case Forming / Re-forming
444 Marlin was once the choice for forming 7x57R and 8x57R. However, 444 Marlin Brass is more expensive than buying loaded ammo for 7x57R or 8x57R right now.
Forum: Case Forming / Re-forming
Grafs has it:
https://www.grafs.com/retail/catalog/product/productId/74148
In addition to PPU brass, they have 7x57R ammo in stock:
...
Forum: Reloading Equipment
I’ve had some CH4D dies and they are fine.
Just FYI that Grafs has Redding 35 Whelen Ackley Improved in stock for $109.
Forum: Reloading Equipment
I have a Marlin 375 and a Contender in 14” and 21”. Never used anything but Winchester 375 Brass as I got them when it was available.
I’ll have to get some long 38-55 and see someday.
Forum: Case Forming / Re-forming
I wasn’t suggesting that piles of 30 Luger were at the local range. Rather that you could form 9mm into 30 Luger and use that. I believe it may come up short but my understanding is that your goal...
Forum: Case Forming / Re-forming
I agree with one of the previous posters, why not 30 Luger? Dies easy to find. And it should form nicely with square shoulders.
Buffalo Arms and S and S firearms both make custom Lyman H &I dies
Forum: Reloading Equipment
Here’s where we had a discussion about those screws
https://castboolits.gunloads.com/showthread.php?458116-Lyman-55/page2
Forum: Reloading Equipment
Lyman E ZEE trim?
https://www.lymanproducts.com/e-zee-trim-hand-case-trimming-system
Forum: Reloading Equipment
Glad to be of help. I just googled Brian Crawford annealer. It sounded familiar.
I do remember seeing pics of the one on his website. It was also marketed by someone else too.
Jason
Forum: Reloading Equipment
Maybe this is the same Brian Crawford?
https://bkceng.com/?page_id=111
Forum: Reloading Equipment
Oh, missed an option, buy another seater plug and modify it with your lathe.
Seriously try the hot glue mod first.
Forum: Reloading Equipment
Here’s the link to RCBS.
https://www.rcbs.com/spare-parts-and-extras/die-parts/alternate-seater-plugs---1%2F2--20/1853.html
If you have the old style from the bottom with a 1/4-28 thread they...
Forum: Reloading Equipment
I pulled my rcbs 45 colt dies and 480 ruger/475 Linebaugh dies.
The 45 colt had the seater that screws in from the top. They are from the 1995 timeframe. The 475 dies the seater screws in from...
Forum: Reloading Equipment
You can get 2” rubber caps at Amazon:
(Pack of 4) SBDs 2 Inch Round Black Vinyl End Caps, Flexible Push-On Pipe Post Rubber Covers | All Caps 1" Deep for a Snug Fit | Made in USA by Caplugs...
Forum: Reloading Equipment
Here is my old Lyman 55 on the left with a 45 ACP case. It’s from one with the metal top and orange in an old style cardboard box. It has a single mill spot to hold it in the measure. The one on...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |