Search:

I nave not fired my box off ppu yet. I recieved some once fired 7.65 ARG ppu from a friend. He shot them through his 1909 ARG. Without working brass the bolt will not close. So I ran them through my...

Delete

I used liquid rust blue. You heat up, apply, the. Boil, take the card off. I already neutralized the blueing. The steel wool took of the carding. But a small layer of carding got layered up over the...

Delete please

I used shellac and mohagony stain. No wood filler or sanding used.

Here are my results using stain and shellac. It shines less in person. It was an authentic match compared to original internal color spots. I have to admit I never thought it would minic urushi this...

Quick question. I am thinking of making my own checks. How many .30 checks do you guys get per square feet?

Thanks for all the info guys. This is a heated topic but any good videos on how to use filller? I don't want to ring my chamber. I can't find any videos online.

Thanks for the info. It will come really handy. Do you have a do not exceed grain data. I am just wanting to make sure. I want to be on the safe side due to reports of pressures and these 2 lug small...

Well I have a hornady book. I only lists jacketed loads. No cast data.

How many grains should be the low end and do not exceed?

I am going to aquire a argentine mauser 1891 pretty soon. Any recommendations for load data I only have cast lee 185 grain .312 gas checked. My bore is very tight. The only powder I have is imr4895....

Special ww2 k98k mauser mold.

Well I started reloading in February of this year at age 16. I recently aquired a japanese type 99 arisaka. After I was struck with reality about the ammo scarceness, I knew that I had to start...

I find it hard sometimes to get good accuracy with open sights. I'm new to 303 after using v notches. Any advice?

I do 34 grains of 4895. Medium accuracy but not as hood becuase my cast boolits tumble in the air due to being .311. I will have use pulled surplus 54r bullets.

132424

Got some done. Did one group 30 grains the other group 34 grains. My first realoading job as a starter And my first cast bullets, how doea it look?

Thanks. My hornady book stated nothing about cast. I read at .303 website that the are running 35-36 for cast 180 grain.

Whats the max amount of grains so that I can know my limit?

As I stated I only have imr4895.

Hello I got a lee .312 mold 185 grain for me enfield and my arisaka. I only have imr4895. How many grains should I use? mininum-max range. Any help would be appreciated.

Hello I got a lee .312 mold 185 grain for me enfield and my arisaka. I only have imr4895. How many grains should I use? mininum-max range. Any help would be appreciated.


thanks