Search:

I pulled 2 1/2 cases (30 cans) of Butchers out of a dumpster a few years ago, I’ve been mixing it half and half with Lee liquid lube.

I have a .50 but always wanted a .40 with the fast twist barrel and schuetzen buttplate.

'Also used to crow hunt in the 70's over at Ft Cobb, OK.'

Migration pattern shifted west, plus less money in peanuts meant less peanuts being grown which means less crow feed.

My wife's family...

Soft alloy to allow the hollow base to expand with low pressure loads would be correct. At 80-1 the tin probably helps the hollow base fill out with not much hardness gain.

I’ve been using the large rifle primers, they’ve been fine.

I did it in the past with no problems.

Lubed and sized some bullets for my .451 muzzleloader.

RCBS makes quality products, their lube sizer is a good one. I used to have one, my brother has it now.

I’m using Butchers bowling alley wax in 45-45-10, mostly because I saved 2 1/2 cases of it from the trash. Seems to work fine for my pistol bullets.

I had a friend who worked the sales counter at a decent sized gun store- and occasionally he talked people out of buying guns.

oops, my mistake. Probably shouldn't be posting after bedtime.

BLL used Johnsons liquid wax. A recipe for using paste wax I've seen was 16 oz. paste wax, 4 oz. liquid alox, 4 oz. mineral spirits. I plan on trying this since by happenstance I have 2 1/2 cases of...

Also best wishes on the foot, hope no grafts are needed.

Loaded some 45-70 using the HS-6 data from the gmdr lever gun website.

Also found some .380 reloads I didn’t know I had, they’ll go to my brother.

The notes at the bottom of the calculator why 8.6 bhn is used as a starting value.

Someone tossed this into the range trash, I had to got dumpster diving to get it out. Appropriately addressed to Southwest Shooters in Oklahoma City, I visited there often in the late 1970's to late...

Press mount and push through sizing dies are also available from

https://www.northeasttradeco.com/


The Moose Wilkinson bullet sized to bore size was one of the better bullets I used when I...

Boiled the old lube out of the lube sizer, going to refill with 50/50 from White Label.

I use 9x13 metal cake panes with snap on metal lids, long enough to hold molds with handles installed. I don’t oil the molds but have used VCI chips in the past. North central Oklahoma is pretty dry...

I use some Mirro cake pans with snap on metal covers, they’re long enough to hold molds with handles. I don’t oil any molds but my climate is relatively dry.

The GMDR lever gun load information has up to 500 grain bullets in 45-70 using various pistol or shotgun powders up to about 1200 feet per second.

Lyman 457124h from another member, it casts quite nicely. Already have a few loaded for my 45-70 for next weekend.

The range lead I collect myself is about BHN 9, it's about 1/3 cast pistol, 1/3 jacketed pistol, 1/3 mixed rifle bullets.

From the 1958 Lyman reprint by Cornell Publications


303417

My brothers Super Blackhawk, 44 mag, don't plan on shooting it again - hopefully I've gotten smarter as I've gotten older :)

not recoil, but the trigger on a CZ52 would painfully slap my finger...