Flybyjohn, this timer has a dual mosfet transister. so your correct it has not mechanical relay. its the same as an SSR. no clicking sounds.
I have seen about 3 different of these timers almost...
Type: Posts; User: Kausit
Forum: 3D PRINTED RELATED ITEMS
Flybyjohn, this timer has a dual mosfet transister. so your correct it has not mechanical relay. its the same as an SSR. no clicking sounds.
I have seen about 3 different of these timers almost...
Forum: 3D PRINTED RELATED ITEMS
GWS, I added the link to print the control box, front panel and buttons on the first link that I posted that has the pictures etc...
Aliexpress does not give much information, I believe all the...
Forum: 3D PRINTED RELATED ITEMS
Well for me it a little annoying and I guess i am anal about it starting and stopping so often. Its more wear and tear but is it enough to really matter for our situation? maybe not, so why do it?...
Forum: 3D PRINTED RELATED ITEMS
Tyler, you are correct. I have 3 filled. Box, buttons and faceplate. If you find it of value for others you can post them with your files. I could also post how to program it. Only takes a few...
Forum: 3D PRINTED RELATED ITEMS
Very similar setup. one I posted uses electronic switching and not a relay.
M500 if the bullets are low it will run till prox is made and for another 3.5 seconds (preset time). so you are right...
Forum: 3D PRINTED RELATED ITEMS
Tyler, that not how it operates, let me try to explane it better.
When bullets get lower then prox it will feed till prox stays on for the preset amount of time.
How many it actually feed depends...
Forum: 3D PRINTED RELATED ITEMS
Not sure that this exact unit has been shown here. This timer will take the place of the SSR and will run the motor for a preset time so that your not starting and stopping the motor every cycle of...
Forum: 3D PRINTED RELATED ITEMS
Thanks so much Tyler. My first test I could tell it worked great.
Forum: 3D PRINTED RELATED ITEMS
I will look at the #2 slide and take some measurements and I maybe able tell if that one will work.
The #2 with saw tooth really does pick up the 223 well and works great from what I have tested. ...
Forum: 3D PRINTED RELATED ITEMS
Sorry but Generator will not run on my computer so I had to print everything out by the manual and a lot of guessing, For 223/556 I printed the #2 rifle bullet collator plate. What side plate works...
Forum: 3D PRINTED RELATED ITEMS
Harbor freight has the same spring kit for a low price.
https://www.harborfreight.com/200-piece-assorted-spring-set-67562.html
Forum: Cast Boolits
Still no luck. I captured these in a 5 gal bucket filled with rubber mulch. There sized at .310 smokes powder coat (shake and bake) 1580fps 158gr. Couple weeks aged harden. I do not have anything to...
Forum: 3D PRINTED RELATED ITEMS
306339
I had to make changes to some of the parts to get things to work best. Now it feed and ejects great. No issues with 9mm, 357, 223, 300 aac or 45 colt. Change over is so easy now. Put in the...
Forum: Reloading Equipment
I bought a lee 1000 progressive reloading press new around 1992 to reload for my 357 and was also casting the bullet. Used a sizer luber for that wad cutter.
Now I am reloading more then ever and...
Forum: Cast Boolits
Update. I took that advice and now I have install gas check and sized lee 312-155-2r powder coated bullets to.310. I still use shooters world Socom. (Just a little faster then 1680) at 16 grains...
Forum: Cast Boolits
Sorry I forgot to add FPS.
Blackout 17gr 1610fps
Socom 15.5gr 1645fps
Socom 16gr 1696fps
What little I have learned was to go .001 or .002 over. Sounds like that is not enough. Thanks for all...
Forum: Cast Boolits
I need some help with the poor accuracy of this bullet as others have reported that it groups well for them.
Bullet:
Lee 312-155-2r mold using wheel weights, powder coated with smokes powder. Sized...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |