Search:

I have used and still have plenty of Evap o Rust!
It works well and doesn’t remove any metal.It leaves a coating on it if you don’t wash the part.
It needs to be covered or it will evaporate and...

The video is really good and I’m glad I watched a while back!

I have been having trouble this morning and this afternoon a few minutes ago.

This morning and this afternoon I have been having trouble accessing the site.
Anybody else?

In summary, I found 3 problems that in my opinion are design flaws
#1 is the thickness of the primer slide. The material that the slide is made from is 0.125” and a small primer is 0.115” thick...

Success!
I installed the milled down primer slide and no primer feed problems!
I ran 50 cases through with only a couple of case feed problems but no primer problems!
I have to work on the primer...

Primer feed problem still!
I drilled the hole in the reduced thickness slide off center so I redid it and got it on center and we will see if that solves the issue!

You got those from me.
Thanks for the update!

I get charged a cash advance fee and raise interest by my credit card company if I use F&F so I pay the fee and use Goods and Services.

Did you finish the projects that you got from me?

It depends on what operations you’re planning on doing.
Premade jackets with soft lead 10 tons,for drawing jackets and lead wire most probably more.
I used a 20 ton hydraulic jack in a bearing...

I am getting to the point of downsizing because I don’t have anyone to leave my hobby stuff to!
I recently went to a couple of estate sales where they were selling tools for pennies on the dollar!...

Problem with the primer punch was that the return spring was too large in diameter for the holder, I reduced the diameter and all is well!
I fitted a small hand sanitizer bottle to serve as a spent...

Getting better function but still having a few hiccups!
For some reason the primer punch is hanging up.
I made a bushing to get the case to line up with the case advance slide and that helped with...

I have that mole but the gas check part has been milled off!
Casts at 250 grains now.

Better than RCBS going out of business if they are having financial difficulties!

I have the priming system working well enough to try live primers!
I did 29 in strings of 10, the first string was 9 because one was missing from the tray.
I had a few hiccups with the cases...

You need one with BALL BEARINGS!
My electronics teacher explained it to me when I was trying to build my first one in 1984.
Months he side torque puts a strain on the motor if it has sleeve...

I did some minor adjustments and the dead primers went through flawlessly!
I only did 8 in a row, next time I will try 100.
If the 100 goes through with no problems I’ll try live primers!

Nice work!
If things keep going the way they are it may be all we can own one day!

A .352-.353 diameter sizing die should not be a problem for Ammohead if you are using a Star.
Lyman or RCBS may take a little more effort.
LEE should be able to be modified easiest of all of them..

I have had the same experience with Liberty Mutual but I have had a few claims on collision and comprehensive.
They were going stupid with the homeowners until I called and asked why it was so high...

I made a tube to feed cases and tried 10 cases with once fired primers and had problems!
Cases feed OK once all 4 cases are in the rails but don’t fall off at the end like a loaded round would, I...

Well priming system gave me fits with multiple primers!
I spent the last 2 days modifying parts and pulling my hair out!
After a good night’s sleep I started by disassembling the entire priming...

Case slide bushing was made and installed today!
I am waiting on the Loctite to harden so that I can put a taper in the bottom like the factory had to help with alignment of the punch and the...