Search:

I have a book that states 4.2 max tb,

My Lee disk .95 throws 4.4 gr my lee 1.02 throws 4.8 gr

both feel good, but that 4.8gr seems to have just a better grouping.

Pistol is a S&W 19-3,...

The red-line bullet mfg calls them "hard cast" and max velocity is 1200 fps, they told me Not to use mag pistol powders with their bullets. I pulled a few bullets and noticed that they were under...

leading looks like a groove in the barrel is full / dirty with lead. If you run a brass bristle brush or some stainless steel wool wrapped brush down your bore and scrub, small flakes of shiny lead...

Excellent, Thank you all for the input. It is an S&W m19 6", I will try and pull down a loaded round and see what the bullet diameter is after loading, and see if an unloaded bullet will fit down...

So I was loading Red Line 158 swc .358 cast bullets, Hogdon Universal powder 4.4gr and after 30 rounds I had some moderate lead deposits about the first 1" of my barrel. Is that an indication of...

Had the same issue, this guy makes all the shim's you will ever need, great small buss.

http://triggershims.com/

good stuff!

No i need to figure out why my police positive is punching...

357 Mag load data:
WC820 (new) powder, 125 grain JHP, Fed SP Mag primer 17.2 gr = 1405 fps @ 1.570" 6" S&W

WC820 new 158 gr bear creek SWC 12.5gr 1165 fps spm 6" S&W

$11 a pound pistol powder, where are you now... Rex come back!

So i used a table spoon of minwax paste wax and a tea spoon + of Allox, seems good now, way softer, try out and let you know.

I will see if I have any STP or ATF but maybe lee allox? That i do have.. Thanks

Any idea if i can cut the blue lube with anything to make it pan-lube material? It's hard as a rock when it dries. Any ideas would be great, thanks!

.380 acp 100 gr plated RNFP 3.4gr CSB-1 @ .980" = great shooting load.

DILLON Seating die has both RN and FP in one, just flip the plug around in the die, Very nice tool. Seat's only no crimp on the die

Think I found one, thanks for all the information gent's!

It's nice to Share is it not? :)

Excellent....

I'm looking for a pointed or almost pointed 9mm mould Lee made one a while back, cant find it anymore looks like the bottom mould here on this pic 125 gn pb or 140 rounded base, any info would be...

again!

This Post has helped me again!

3.0 gn Rex #2 or Titegroup 38 spl with a 148gn HBWC, flush to case at 770 fps all day load :)

REX #2 is Almost identical to Titegroup, I really like it, and affordable! :)

I have been looking for this link for weeks! they removed it from the web site, THANKS!!!

So far:
Berrys Jacketd bullet 350gn with AA #9 30.5 gn 2.085 COL = 1365 fps but lee roll crimp came "Loose" after 3 rds and the last two were way pushed out, so I had to re seat bullet. ( I ordered...

Thanks,
Pressure signs looked fine, not hard to extract the case, primers were not pancaked, still can read the C on the mag tech LR primers, I set some on the crimp die and filled them to 25gns of...

I have some bear creek supply 340gn RNFP that I would like to load for my 500 S&W any ideas on COL or amount of AA#9 to use?

I have first loaded 30gns of #9 at 2.060 came out to 1430 fps, some...