Search:

Find a bullet close to your cast bullet and edit the info and name. . Next time you open the program it will be in order by diameter. Do the same for case size. Same with initiation presure. 2...

How fast you want to push it with what mix? I got gas check molds so I don't worry about how hard my lead is. Under 1400 you don't need a check with 15+ lead. I got a 630gr mold and I push them...

Use it in 500 mag. 20gr with a 375gr gas check bullet or 16gr with a gas check 475gr bullet

All is good since your sharing the wealth. What pisses me off are the guys with their nose on the glass at Walmart at 7am for 22s that have them listed on gunbroker before noon.

Quite a score Here in RI at my LGS you would have only got 1 8 pounder at a time so everybody could get some. Buying everything on the shelf is why there still are no 22s to be had. If your a...

Anything in 22mag?

Personally the mini mags, the Tactical, and the Swamp people run all the same for me. I also get better groups at 100yds with the Winchester M-22 in my savage bolt

New starline brass 10gr of 2400 and a 200gr head in a 610 revolver No need for a 10mm mag with this load

Smith 610s were bored out to take the 10mm mag and could shoot all 3, .40 10mm and 10mm mag but had to use moon clips for everything but the mag. Accuracy suffered using .40 because of the long...

Sorry I love my Dillon. I can beat on it like a red headed stepchild in the dark and still crank out good ammo. If your happy with your Lee I say great but Lee didnt stand up for me. My buddy...

I spend the winter casting and start loading in March. Set up and load a caliber a week. Loading mostly 45 and 38 lc with some 9mm 40 and 10mm. 44mag is for the lever action and 1000 rds covers me...

Why not just burn in woodstove for heat and recover the lead when cleaning out the ash

To each their own but when you sit down and load 2000-4000 of a caliber at a time at 600+hr you can't beat a 650 Dillon with case feeder

Lee press owners are future Dillon owners. In any case your better resizing in a single stage cast iron press. After that your going to need a case trimmer to trim to lenght and a primer pocket...

When I tried the lee slugs I just used a 1 oz birdshot load and got decent short range results.(15-30 yards) Seem to remember using a 1 1/8 wad with an overshot card before crimping. Too cheep to...

I got mine from a place called Old Sarges Drop Zone out of NY Was 100 steel clips for $30 Have been happy with all of them using mixed brass. De-mooner is easily made from a golf club driver. Cut...

bought the FA unit and after a couple min deburing it was great. Went on sale and bought a spare
Dave

It's a Nagant! Pull the bolt, Put the bayonet on and then stick in the dirt, Piss down the barrel and oil. It's not a .5 MOA sniper rifle!!!
Dave

Pre-lock 686 in a 6 shot or a pre-lock 627 in an 8 shot I'm just a purest for pre locks and I got friends that swear by the newer lock guns

Redd All I have experimented with are 44 and 45 cal bullets in sabots both jacketed and cast lead
Acuracy is just about the same except for a height diference on target depending on load

I own the Optima and run 80 gr of Blackhorn 209 with a 250gr Hornady HP with a sabot. 50yd standing shots on the 8" gong are no problem. Gun wears a 2x scope and cloverleafs 3 rounds from a rest

Reach down deep and grab a new set of balls. Put 10 grains of 2400 behind a 220 gr .401 in 10mm and feed it to a bowling pin with a 610 smith. Bowling pin flys about 6 feet past the box while 45...

Burning some 452aa myself right now but it seems smoky as opposed to bullseye with a lead bullet. Same smoke with hard or soft lube.

Don't know about position but 296, LilGun and H-110 you can't do light charges as it either fizzles or detonates, I would assume from it not filling the case and lighting off along the length of the...

I ran 5.0 with a 100 gr plated in a 38 long colt for steel plates when I ran out of 147s day before a match. Worked fine and felt comparable to my 147s at 4.0 of BE