Search:

Nope
I had to make my own toys.
I still do.

Funny thing is,
About 90 % of things that I do or teach others , were things that I figured out how to do them myself.
Maybe in my life, I have always had too much money and time.

Thank you friend.
I am glad that I helped you get pointed in the right direction.
I love helping others.

I do have access to that kind of cash.
But I am not into those type of revolvers any more.

I went to the .61 bore diameter on that Renegade because , I had a .600 dia round ball mold.
The rifled barrel shoots better at 100 yards then the original .56 SB did.
I intended on using that .61...

I also have a .75 cal smoothbore flintlock Blunderbuss / Musketoon that the barrel is 1” wide at the narrowest point near the muzzle of the barrel .
The breech area of the barrel is 1 1/8” octagon....

I had Hoyt take a 1” octagon 56 smooth bore out to .61 rifled barrel
That barrel fits one of my TC Renegades.
Bobby Hoyt can give you the information you need to know for your type of barrel

I also tried 45 casings filled with lead . They worked good but there was still just a little lead exposed.
I had crimped them over some more with a Socket and hammer.
I probably could have done...

When I tried using Powder Coated balls in my mill,
The PC did start chipping off .
It did leave tiny colored flakes in my powder.
But didn’t affect the powder burning.
But you can see,
If the PC...

You can always size those slugs to a diameter that works best for your gun.
The size of your castings can also be from the type of material you are using.
Pure lead cast different than most alloys....

Those slugs look good.
You are using them for shooting out of the cartridge in both of your pistols.
Will that 200 grainer work as a conical in your BP revolver cylinder.

Are you going to try the softer lead for the boolits that you will shoot with BP

Still cheaper than finding a brand new barrel and also paying shipping

I have had to use a PVC spacer under my die to press the pucks out of my die.
My spacer was just made out of a piece of the right interior sized PVC pipe , glued into a PVC collar or coupler to make...

I haven’t had a barrel done for over a year and a half.
So I can’t give you the current prices .
But all you have to do is call Bobby.
But what I am getting ready to send him is also .50 Renegade...

On my used barrels that I want to Lap or Polish up a bit when I refinish a rifle , I make a Lapping Lug out of Epoxy and use some kind or polish like chrome cleaner.
I haven’t found any Hoyt...

I have pressed a half pound of powder using that aluminum plate under the die so far.
It has worked pretty good.
Now my aluminum plate is the bottom of a Cat Food can that I pounded more flat.
I...

I have built many Mauser 93’s over the years.
But never one to this fancy level.
I am glad I helped you with some of the mechanical items like that customized trigger.

Today I think I am going to solve my problem and accuracy for loading Homemade powder that weighs less than factory powder or less density.
I am just going to take me Adjustable powder measure an...

Thinking that small pucks to fit the barrel makes me thing of Rocket Powder too.
Some people might want to use some kind of Pucked powder to make loading easier since they don’t have to weigh the...

On a couple of rifles that I built that I intended on using only lead slugs, I took a piece of the tip of the barrel about 1 1/2” long and made a die out of it to Pre-Rifle the slugs to match the...

The reason I use a plate of some type to sit on my presses steel plate is because I set up the die on the bench next to my press.
I was setting it up on that plastic plate , then I could move it on...

When I first started Corning my powder.
I used that same type of plastic that was 1/8” thick for spacers.
Like you said like the milk bottle spacers. It would compress and spread out so much that...

Today I found a reason why my density was coming out lower using my 20 ton press.
What the problem was is,
I was setting my die on a piece of 1/4” thick very high impact plastic on the steel plate...

I actually have some TC Mag Sabots
PM me your address and I can send you some to try.