Good suggestion on the NOE. I have their system for my 257 air rifle boolits.
Thanks
Type: Posts; User: pps
Forum: Coatings and Alternatives
Good suggestion on the NOE. I have their system for my 257 air rifle boolits.
Thanks
Forum: Coatings and Alternatives
I love the way coating this looks. Tumble coating with airsoft bb's seems to work great. I experimented yesterday curing at 425 for an hour so that I can heat treat the base (water up to the top...
Forum: Coatings and Alternatives
This is my first attempt at powder coating. I used "Wet Black" and tumbled with black airsoft bb's and got a nice even coat. The bullet on the right (Mihec 90 grain bullet for .380) I used needle...
Forum: AirGuns
181910
This is the 87 grain noe. 6" penetration into wet news print with some expansion, even though it wasn't hollow pointed.
I'm actually shocked that this bullet stabilizes.
Forum: AirGuns
It's a TJ's barrel. I keep the power turned down enough to keep the MV at about 1050fps. I firelapped the barrel, and the groups at 100 have shrunken down to about .75" The NOE 87 grain flat nose...
Forum: AirGuns
I've been tinkering with an airforce condor. R&L built it, put a super seer on it so the trigger pull is very nice. The valve from Doug Noble really kicks up the power.
40:1 mix, 69 grains...
Forum: AirGuns
Bob, do you have a link or other contact information for TJ's?
Forum: AirGuns
Nice work, Bob. I ordered a 5 chamber mold with one drilled for the hollow point. Now to decide on which airgun to get. Leaning towards the Condor with 24" barrel (I understand it's loud, though),...
On the hollow points, for better accuracy I might just back down on velocity a couple hundred feet per second, as they are not having any problems opening up and fragmenting. I do want these for...
Forum: Hunting with CB's
Actually, I plan on ONLY hunting outside of Kali, once 2019 rolls around and the whole state goes lead free. A game warden friend of mine says he does not blame me. He hates the lead ban, refuses...
Ok, an update on these boolits. The 311041 at 2250 fps were grouping 3" at 100 yards. The MiHec "308 hunting round" at 2500 fps grouped 4 to 4 1/2" with both the hollow point and the solid. The...
I have used Linebaughs loads, and continue to do so. My favorite is the 325 grain boolit over 13 grains of HS-6 with a mv approx 1100fps. No leading and very good accuracy. I prefer this load to...
It's funny. The one that lost it's base was the one launched at 2275 ft/sec. All the boolits lost their GC. None of the 2500 ft/sec boolits lost their bases, however.
Yes LG uses 50:50 ww:Pb. On the 311041 I just used ww but was trying out heat treating only the shank and letting the tip air cool. With respect to the check on the last set of pics...yes it was...
Worked up some loads and tested them into rubber mulch. I used Larry Gibson's work with Leverevolution powder in 30-30 as a starting point to work up loads. Everything was done in a 20" Marlin that...
Forum: Cast Boolits
You could always load them backwards and avoid the problem. ;)
Forum: Classics & Stickies
Absolutely fantastic if you have a range in your backyard, and don't have to move the trap around.
Ran some boolits over the chrony sat.
27 Grains = 1700fps
27.5 1737
28 1800
28.5 1875
28 Grains was the tightest group at 2"... Found my load....
Forum: Boolit Lube !
I use one posted here.
1# Beeswax
3 tablespoons of Vaseline
1 teaspoon of Johnsons paste wax
Forum: Cast Boolits
The 311041 is nice. I like reloader 7, but this batch has loadings of varget from 27 grains up to 28.5 grains. They will have to wait till after opening week of deer season (STUPID LEAD...
Forum: Lead and Lead Alloys
I used 50# of magnum shot/40# of pure lead and a #of tin to get close. With the magnum shot you get the arsenic that helps if you want to heat treat.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |