Search:

I tried improving the shape of the end and it didn't have enough length to close. You can get the lead so hot it will run into the vent lines and start fining on the parting line.

Is your gun made in Austria or USA? Even though Glock says they are the same, the tolerances are "looser" on the USA guns.

10R80 transmission?

Maybe not as high, but still kicking.

San Diego or Murphy. Balloon head screws or flat. Skinny handle slot or big. serial # or size with mold #.

Go to the H&G sticky.
...

That style mold requires you run it as hot as the hubs of hell to work properly.

Standard old school duty ammo bullet. Easy to load in your revolver and use for close personal protection. It should be in pristine condition and San Diego for upper end price. Not a high demand...

Here ya' go:

https://www.youtube.com/watch?v=A8Zdo8696QE

You got that right!

You got the mold and alloy temp right. When it starts to crumble instead of wire like, you've got things too hot. But it looks like you got it right. I've got some that are a few(?) years old and...

700 with any antimony/tin and 725-750 with lead.

The iguanas dig tunnels and undermine the sea walls and bridge abutments. They eat the plants around the houses. The males are territorial and if you have one claim your yard he will attack with a...

Ya'll figure these folks just stuffed anything in their rifle and let fly?

https://en.wikipedia.org/wiki/Creedmoor_Rifle_Range

They exploited the benefits of cast bullets more than we do cuz...

You might look here for your containers:

http://www.fellingfamily.net/isolead/

Medium cylinder from your outside dimensions. Maybe check the weight to refine your search.

I always figured the rifles in sheathes was to keep the sand out in those old westerns. Makes sense to keep it out of the sun so you don't stick to the rifle while trying to focus/concentrate on your...

We tried the Aguila sniper subsonic for silhouette back in the day. Biggest problem was stabilizing the bullet way out there. You'll need a faster twist barrel for it to work at the right bore/groove...

Not talking about you specifically. Talking about the rest of the non tool making crowd of which I'm one.

"Getting accurate repeatable dimensions on a taper is tricky with out an gauge."

You'll get pretty good at it if you practice with your tools.

The powder funnel/expander for my Dillon 550b 9mm is .353. I size my 9mm bullets to ,357 cuz that's what the throats in my guns like. I went round a little with the fella that made me a custom...

Rat snake.

https://srelherp.uga.edu/snakes/elaobs.htm

I do 60-120lb batches at a time and send a sample to be tested. Last 2 were 90.5% and 92.6%. I spent less than the asking price from the foundries.

If you find 95%+ pewter for $10/lb shipped, how much can you alloy with the same $92? How much difference is there between 95% and 100% in your final casting alloy? Or 90% and 100%? I've cast with...

They got clear if the colored ones bother you. Goes on white and cures/drys clear.

I coat and bake 14-14.5 lbs of bullets at a time. I'm using an Oster countertop convection oven whose total wattage is 1500 watts. I'm like most ovens and folks, I monitor the air temp in the oven....

I made my way through 5000 that were bought last year and started on some Ginex. Out of the 5000 I had 6 that didn't fire even after 3 striker hits. Had 15 that went bang on the second time through....