Search:

Kind of had some problems with my .40's My Para load to go was 29mm OAL with WW. All was fine. Could shoot all day no problems or leading. Last summer i got my hands on a SVI for match use. And i did...

My .45 Colt loads fails with boolits made for the .45 acp. The sweet spot for these seems to be around 800 to 850 fps. N310, N320 and Titegroup loads are in progress.
In 454 Casull and 460M the 370...

Did some testing in my revolver.

http://i58.tinypic.com/i75reu.jpg

After some time i terminated the LFC in my setup and just use it as a bulge buster wannabe. I use the dillon setup on the press. And after 150 fired rounds the bore is clean. Thanks for the solution.

Here in norway these guns seems to have a starting price around 400 dollars, and a good 900 dollar for a nice original one.

It is 3 different 357 revolvers that spread out the load, in my model 14 every hole touches at 30 yards, but in model 27, 28 and 586 it open up the group, from 2 to 4 inches. Its not a problem since...

I have a couple of loads and bullets that i use in my model 14 with exellent accuracy, but when i use these loads in my 357 revolvers it spreads out, is this common ?

When i collect ww here in norway, it is separated in 3 parts - Lead, zink and iron, i have only used the lead till now, but i want to give the zink a try in my glock 22. If anyone have tried that...

I slugged my g22 barrel today, and it seems to be so close to 402 that i say its 402, my question now is: do i need a 403 bullet or do the glock barrel sqeese out the bullet so that the 401 fits ?...

I use the lee 200 grs swc, and is happy with it, but cant wait to get my hands on MiHec's 200grs hp.

I use the lee 105swc bullet with 3,4grs with vv-n310 powder, it runs around 890fps, and in a ransom it will knock down a coin at 25 meter. I love this bullet for target shooting. If you can, you...

(This is post is on the off topic joking side, but i had to)
I read a whole lot about corn production a couple a years ago, and they spray the corn field with female hormons to make it grow faster....

I love this hp bullet that this mold makes. My 4" model 27 delivers these in 1380fps. Shot it in ransom rest, and all 6 in one bigger hole

Here is my 1943 Remington Rand, it has been mine for a year, guess 3000 shots in that time, it will be a lot more this summer, as you know, i cast my own....

I ran 1000 lead bullets in my glock 22 before i heard of the lead in glock tale, got spooked and got 2 packs with frontier bullets (4000) will run out of them this spring, and i'm going for a mold,...

I got a bucket today again, and only 40% was lead. I will collect while it still is some lead in the bucket. I do clean the indoor range and have feed my 38, 40 and 45 with that since i startet...

http://i51.tinypic.com/96l1kh.jpg

In control of everything....

You can't use a gun that is to big, can you :)

Seems like i could get a good start with the RD combo. It will be used for plinking and hunting white tail deers (smaller norwegian kind) and some red fox'es.

I use the lee 105grs. for a plinking load in my 38special, and i have tried both pan lube and tumble lube. TL works for me. I found the brp page, and i will look into it. thanks

Hello casters.
I am new to casting, just got my lee pot and 3 molds (1oz slug, lee105grs swc and a RN .44), and as i go on this page all my bad experience with lead bullets in my 1895 seems to be...