Lyman 310 Swap thread

I have a #3 MR die.

Muzzle resizer for 22 WCF.

22 WCF is not 22 Hornet or 225 Win. It is 22 WCF.

See this thread:

http://www.assra.com/cgi-bin/yabb/Ya...num=1221705914

I have PC#17

Priming Chamber #17 for 33 Winchester.

I have Priming Chambers #21, #25, & #27

#25 is 41 Long

What is #21 for?

What is #27 for?

I inventoried a box of items I had and put the best description from the markings. Be glad to provide pictures or further description if you have any questions. I’m looking for dies for 40-63 (405 doner cases. I already have the priming die); 40-65; 38-50 (30-40 Kraig and RMC cases); 35-40 (38-55 Cases); or 38-55. Also interested in tong tools or case inserts for 45-70 or 38-55.

310 243 4 dies
*243-2440Da
*Deprime #2
*Expander
*Sizer 243 WIN-MR
310 (Box Marked 222)
*Seater (222) stem marked 45C
*Decapper (no marking)
310 (sacked marked 30-06 Short
*Sizer (marked 123)
*Priming die bullet seater stem?
*Looks like Expander plug
310 Two Dies
*Stem (marked 329)
*Sizer
*Decapping die
310 Two dies and Seating stem
*expander (marked 311)
*Expander (Marked 224)
*Seater (marked 277)
310 Expander Plugs
*marked 285
*marked 280
310 Shell Inserts
*marked #1
*marked #2 (2)
310 Sizer Dies
*Marked 222
*Marked 116
310 Priming stems
*Spring return (2)
Two dies
*One looks to be a sizer (marked 121)
*Priming die (marked #6)

Quote:

---

Originally Posted by BrassMagnet

I have Priming Chambers #21, #25, & #27

#25 is 41 Long

What is #21 for?

What is #27 for?

---

Priming chamber #25 has been traded. I still don't know what #21 and #27 are used for.

Quote:

---

Originally Posted by BrassMagnet

I have PC#17

Priming Chamber #17 for 33 Winchester.

---

Priming chamber #17 for 33 Winchester has been traded.

Quote:

---

Originally Posted by Texas by God

To all. I have a Tru line turret press that I want to put to use. It has the 30-06 shell holder in place so I'm looking for .45 ACP dies and possibly 22-250, .300 Sav? Used to have a cigar box of 310 dies but a ghost got them I guess. Best,Thomas.

---

I too am a fan of the tru Line Jr. according to my charts the 45 ACP, the 30-06-the 22-250 and the 300 Savage all take the #2 shell holder.

I just picked up 2 Tru Line JR turret presses cheap and found the 310 dies to be a bit pricey. There is a fellow on evil bay tha makes a new turret for the JR that uses normal loading dies. I just bought one for $40. It fit well and works well and now I can use my existing dies and I have the adapter to use std shell holders as well. The press doesn't have a lot of leverage so I'll probably set it up for 32 S&W long and a couple of other easy to size cases.

Quote:

---

Originally Posted by rbuck351

I just picked up 2 Tru Line JR turret presses cheap and found the 310 dies to be a bit pricey. There is a fellow on evil bay tha makes a new turret for the JR that uses normal loading dies. I just bought one for $40. It fit well and works well and now I can use my existing dies and I have the adapter to use std shell holders as well. The press doesn't have a lot of leverage so I'll probably set it up for 32 S&W long and a couple of other easy to size cases.

---

Great for neck sizing and bullet seating!

Quote:

---

Originally Posted by rbuck351

I just picked up 2 Tru Line JR turret presses cheap and found the 310 dies to be a bit pricey. There is a fellow on evil bay tha makes a new turret for the JR that uses normal loading dies. I just bought one for $40. It fit well and works well and now I can use my existing dies and I have the adapter to use std shell holders as well. The press doesn't have a lot of leverage so I'll probably set it up for 32 S&W long and a couple of other easy to size cases.

---

One of my TL Jr presses stays set up more-or-less permanently for the 32 S&W Long. It seems to be the perfect size for that cartridge. I have to admit though that I often batch process the brass by doing decap and full length sizing with a TC die in a big single stage press.

Froggie

Quote:

---

Originally Posted by SgtDog0311

I inventoried a box of items I had and put the best description from the markings. Be glad to provide pictures or further description if you have any questions. I’m looking for dies for 40-63 (405 doner cases. I already have the priming die); 40-65; 38-50 (30-40 Kraig and RMC cases); 35-40 (38-55 Cases); or 38-55. Also interested in tong tools or case inserts for 45-70 or 38-55.

310 243 4 dies <--- Im interested in this group if we can come to a mutually acceptable agreement
*243-2440Da
*Deprime #2
*Expander
*Sizer 243 WIN-MR

310 (Box Marked 222)
*Seater (222) stem marked 45C
*Decapper (no marking)
310 (sacked marked 30-06 Short
*Sizer (marked 123) <---123 is the code for 30-06
*Priming die bullet seater stem?
*Looks like Expander plug
310 Two Dies
*Stem (marked 329) <---- If its a plain expander stem, that should be the diameter

*Sizer
*Decapping die
310 Two dies and Seating stem
*expander (marked 311) <----
*Expander (Marked 224) <----these should be diameters
*Seater (marked 277) <--- not in my chart, it may equal the last 3 digits of a mould number

310 Expander Plugs
*marked 285 <---should be diameters
*marked 280
310 Shell Inserts
*marked #1 <---This is 30-30 class shells. I could use this

*marked #2 (2) <---30-06 class shells, any similar diameter also, like 250 sav

310 Sizer Dies
*Marked 222 <---for 222, can probably work with any similar sized 22 centerfire

*Marked 116 <----7mm, meaning 7mm mauser
310 Priming stems
*Spring return (2)
Two dies
*One looks to be a sizer (marked 121) <---shows as 405 Win if its a sizing chamber

*Priming die (marked #6) <---30-30 I'm interested if we could come to an agreement

---

Posted comments in the quote above with arrows <--- Info is from my copy of the Lyman Ideal Handbook No 39, copyright 1953

I would be interested in a set for 25-06 (257 would probably work also), even if pieced together. I have spare priming chambers and expander chambers that I can complete it with, the other parts are what I need. Could make do with just the expander stem also along with the muzzle resizer and DA(seater/crimp die).

I have a 30 cal magnum (probably 300 H&H, but may work with Win Mag) muzzle rezizer and DA die Id trade.

Have two pieces of 303 Brit dies. Will check further to ID which parts.

Need a handle for 348.

Interested in 44-40 set

Have a complete steel handle set for 375 H&H Id trade for anything useful to me.

Well, since I now have the shell holder, I guess I'm on the lookout for a set of 38S&W dies! What a way to begin - start with a shell holder purchased by accident because of my dyslexia! I'll have to find a gun, too.

Quote:

---

Originally Posted by Wayne Smith

Well, since I now have the shell holder, I guess I'm on the lookout for a set of 38S&W dies! What a way to begin - start with a shell holder purchased by accident because of my dyslexia! I'll have to find a gun, too.

---

It has just started. Mould. Sizing die.
Just sent it my way. All I need is a pistol.

Quote:

---

Originally Posted by BrassMagnet

It has just started. Mould. Sizing die.
Just sent it my way. All I need is a pistol.

---

May I suggest a S&W Terrier? (It's cute as a speckled pup!)

Froggie

Cute, yes. However, LOML convinced me I can only spend money once - and I still have to pay for the flintlock. Expecting an e-mail any day.

I have a complete .45 ACP Lyman 310 tool new. I would like to trade it for .22 Hornet 310 dies... I have an extra small handle.
Please let me know... Thanks... Bobby...

Quote:

---

Originally Posted by JoseBob

I have a complete .45 ACP Lyman 310 tool new. I would like to trade it for .22 Hornet 310 dies... I have an extra small handle.
Please let me know... Thanks... Bobby...

---

Can do!

Anybody have 303 savage dies or .44spl/mag dies collecting dust?

Deal made... Thanks.... Bobby

I have a set of 44-40 (complete) will trade for a good set of 223 Remington regular press dies. The 44-40 dies are in excellent shape and are in the original orange plastic box.