Printable View
I want to load .356 124 gr LRN for 9mm Luger with Titegroup (I have a lot of it). Load data is like unobtainium. Closest I can find is Lyman's load data for Hollow base cast bullets. Anyone have a favorite recipe or two for the Lee .356 124 gr LRN using Titegroup, or where I might find it? Thanks in advance.
Welcome to the forum!
Are you loading 9mm?
The Hodgdon data center has data for a 125 grain boolet with tite-group.
My 8 pound vessel may outlast me!
What are you loading for?
Sent from my Pixel 5 using Tapatalk
Assuming 9mm, my go-to load with that bullet is 4.0 grains Titegroup at 1050 fps. All my 9's love it
Please always state cartridge you intend to load for, thanks! A .356 bullet implies 9mm Luger, however there are other cartridges that can use .356 projectiles. You mentioned titegroup --that is a Hodgdon powder, they have good data on their website, so that is where I would start looking.
Thank you. Edited post for 9mm.
9mm. Thank you.
9mm. I have edited my original post.
Thank you. Thats what I'm coming up with as well.