What and where to get a mold for .264 Lee had some in the Swiss after resizing work well for the Jap. I am trying to locate one thanks
Printable View
What and where to get a mold for .264 Lee had some in the Swiss after resizing work well for the Jap. I am trying to locate one thanks
You need to slug your bore. It might have .268 grooves like the carcano.
[QUOTE=Gobeyond;5680152]You need to slug your bore. It might have .268 grooves like the carcano.[/QUOTE]
Carcano's were designed to shoot .266 diameter bullets not .268.
mine likes boolits sized at .270
Mine too.
I tried the Lee "Cruise Missile" in my Arisaka, but it would not stabilize at cast boolit velocities. Since then I acquired the Lyman 266469, which at a nominal 145 gr is much closer to factory service loads. It works much better.
Wayne
Titan has them.
they are a banner sponsor, link in banner on top of this page.
Guys, don't count out a .268 Carcano barrel on an Arisaka.
I had one like that, Carano barrel .268 dia. and all on a 6.5 Arisaka.
Got a 6.5 Adams and Bennet barrel from Midway, turned it into a 6.5X257 and it shoots great.
Even put a Richard's semi-fancy stock on, thanks to UPS breaking my Boyd's stock.
The Richard's was on sale.
Blkpwdrbuff
Pm me if you find that you need an oversize die.
Night Owl Enterprises in Provo, Utah has molds in all manner of size and config.
My Type 38 would tumble .266" cast bullets but launches them good @ .268". I found an old Ideal 266469 off ebay and it drops fat bullets.
I had one of this forum's die makers do up a .268" sizing die for my Lyman 4500 size/lube press. I'm shooting these .268" in my Swedish Mausers and the Type 38.
This is a good one but out of stock!
https://noebulletmolds.com/site/prod...269-163-rn-w6/
There's some of this one in stock.
https://noebulletmolds.com/site/prod...70-151-rn-bb5/
Get a .268" expander
https://noebulletmolds.com/site/prod...er-plug-rifle/
Dutch
Until you find your mold, check Steinel Ammo. They offer a couple different cast .268 cast (checked and coated) for the Carcano, a 150gr and 162gr. Like others here, my Arisaka will tumble smaller sized (i.e. <.266) but these do ok.
https://steinelammo.com/product-cate...nents/bullets/
Semper Fi