I am reloading 9mm For a cz75 bd.
Lee 120tc@1.050coal
Does not pass plunk test or go all the way into Wilson max cartridge gauge.
I painted loaded cases with Sharpe and found just towards bottom of case it is barely bulged, not enough to see without marker. Not enough to feel. Just below where resizing die sizes it. I was using fcd but that was sizing bullets. Have tried Lee sizer and Lyman, although only using lee shell plate holder. I am tempted to shave some metal off sizing die so it sizes deeper but idk if that's okay.
Not really sure what to do now.