Printable View
I picked up a couple of heavy boxes of reloading stuff recently. Among the treasures were these two Pacific single stage presses.
Both have rams for .38 Special, one is complete with a Pacific seating die. The other is missing the priming arm.
Any idea how old these fellas are?
Rusty
Attachment 320958Attachment 320959Attachment 320960Attachment 320961
Since they don’t have the bosses on the die holder for the primer magazine, they are mid- to late 1930s; pre WWII. They used a clamp-on aluminum holder for the primer tubes that is difficult to find now.
The very earliest ones have “Patent Pending” on the offside of the frame; later ones have the patent number.
The ram shell holders were standard back then, but the change to a different one was not difficult. Rams can still be found, and I believe RCBS sells a ram that will fit modern snap-in shell holders.
That press was revolutionary when it came out. Previously, any setup capable of full-length resizing was either very slow or very large and expensive. When Pacific debuted that “C” Press, 90% of the older loading tool designs were on their way to the rubbish heap of history.
Nice snag ! That was the first "standard" press I think. I think the only true survivor was the Ideal 310 line up. Rams can be had from RCBS, Lyman, or CH4D (I think) about $30. Lots of companys used that shell holders system. The primer attachment is hard to find. Most got trashed apparently. Also, RCBS at least made a wedge to mount under to make it a true vertical ram. They resize on the upstroke so mount n a good solid heavy table. My gramps had his cabled to the floor. It was on an old sewing machine stand. Enjoy!
Thanks for the input. I'm afraid I just don't have the room to keep them, I picked up the boxes of stuff for the components included. These presses and some other similar vintage (and earlier) treasures will be finding a new home. I hope someone will be able to put them to good use.
Included in the horde was a lot of similar era boxes of boolits, some .38sp, .30-30, .348, .280 Ross, and quite a bit of .30-06 brass. It was all piled in old wooden Velveta cheese boxes and old wooden cigar boxes.